Spread out a drop cloth or other protective material such as cardboard on the floor.
Attach granite to wood.
Cut just outside of the lines you traced to leave some room for the granite to be grinded down and smoothed on the edges.
2 sand scuff up the perimeter of the top.
Wear gloves goggles and a face mask to protect yourself while cutting the granite.
This includes making sure the table is strong enough.
If needed you can make a simple rack from 2x4s.
Have someone catch.
It s important to always carry the countertops in a vertical position never horizontally flat to avoid cracking or breaking the stone.
Take the table outside and put on a niosh n95 dust mask always wear a.
If the pieces of the granite are very small they will use silicone caulk but otherwise nothing is used and they just sit on top of the cabinets.
He mentioned that the granite countertops are so heavy that they won t move once in place so there is no need to attach them with anything to the cabinets.
Protect the edges by covering them with wide painter s tape.
Make sure the plywood does not overhang the outside dimension of the cabinet.
How to attach a stone table top to a base step 1.
Granite is traditionally attached using 100 silicone caulk.
Position the stone table.
The plywood supports the granite and gives enough clearance for the bull nose edging to clear the drawers and doors.
To transport granite slabs carry them on edge in an a frame rack the way glass is carried.
If you are unsure get.
Prep the cabinets to receive granite countertops cut 3 4 plywood to fit on top of all the base cabinets.
Process for attaching the granite top 1 inspect and measure the current table.
Apply a thin coat of industrial strength adhesive to one side of each of the plywood squares and glue them to the bottom of the stone centering each piece of plywood over the mark for the screw.
You can just attach the granite to the cross you don t really need the wood top.
3 lay out the.
Cut off the tip of the silicone tube to allow for a 1 4 inch opening in the tip and load it into the caulk gun.